What are the materials of the bar chair?
According to different materials, bar chairs generally have the following three categories: solid wood bar chairs, fabric bar chairs and bar chairs with electroplated bases. There are skills in buying a bar chair. Of course, the chair you buy needs to be carefully maintained.
The biggest advantage of the solid wood bar chair is the natural wood grain and the varied natural colors. Since solid wood is an organism that constantly breathes, it is recommended to be placed in an environment with suitable temperature and humidity. At the same time, avoid beverages, chemicals or overheated objects on the surface to avoid damage to the natural color of the wooden surface. If it is made of Meinaboard, when there is a lot of dirt, it is recommended to use a diluted neutral detergent and warm water to wipe once, and then wipe with clean water. Remember to wipe off the residual water stains with a soft dry cloth and wait until it is completely wiped off. After that, use the maintenance wax to polish, even if you are done, only by paying attention to daily cleaning and maintenance can the wooden furniture last forever.
After purchasing the fabric bar chair, spray it with fabric protector for protection. The fabric bar chair can be patted with a dry towel for normal maintenance, and vacuum at least once a week, especially to remove the dust between the structures. When the surface of the cloth is stained with stains, use a clean cloth dipped in water to wipe it from the outside to the inside or use a fabric cleaner according to the instructions. Avoid sitting on the sofa with sweat, water and mud. It is recommended that most of the linings and cushions of fabric bar chairs are divided into hand washing and machine washing. You should check with the furniture dealer, because some of them may have special washing requirements. If you find a loose thread, do not tear it off with your hands. Use scissors to cut it neatly. All cloth covers should be cleaned by dry cleaning, do not wash, do not bleach.
Do not place the bar chair with electroplated base in a damp place, or wipe it with a damp cloth, especially soapy water or washing powder water. The base part should avoid contact with substances such as hydrochloric acid, table salt, bittern, etc., and do not place it in a coal-smoked place. If there is rust on the electroplating base, you can apply a brush or cotton yarn to the rust on the rust. After about 10 minutes, wipe it back and forth several times to remove the rust.